HifiSpeaker.wiki | Recent Update | Privacy-Policy | About Us | Contact

Kenwood KA-6150



Share
Pin
Send
Share
Send
Share

Brand: Kenwood

The Kenwood KA-6150 is a two-channel car amplifier that is designed to provide high-quality audio performance for your vehicle's sound system. Some of its key features include:1. Peak Power: The amplifier boasts a peak power output of 90 watts per channel at 1% THD, which is more than enough to drive your speakers to high volume levels without distortion.2. RMS power: The amplifier has an RMS (root mean square) power output of 45 watts per channel at 14.4 volts, which means it can deliver consistent and reliable power to your speakers over extended periods of use.3. Frequency response: The Kenwood KA-6150 has a wide frequency response range of 20 Hz to 50 kHz, allowing it to accurately reproduce a wide range of audio frequencies.4. Low-pass filter: The amplifier features a low-pass filter with a variable cutoff frequency between 50 Hz and 500 Hz, which allows you to tailor the amplifier's output to your specific speaker setup and preferences.5. Subwoofer Level Control: The amplifier includes a subwoofer level control that allows you to adjust the volume of your subwoofers independently from your other speakers, providing more precise and controlled bass response.6. Gain Control: The amplifier has a gain control feature that allows you to set the input sensitivity, ensuring that the amplifier works well with a variety of different sources, including factory head units or aftermarket receivers.7. Protective circuitry: The Kenwood KA-6150 features protective circuitry, such as short circuit protection, thermal protection, and overload protection, helping to prevent damage to your speakers and amplifier in the event of an unusual situation.8. LED Power Indicator: The amplifier includes an LED power indicator that displays whether the amplifier is on or off, making it easy to check if your amp is functioning properly.Overall, the Kenwood KA-6150 is a reliable and high-performing amplifier that is suitable for a range of different audio systems, from basic stock speakers to more complex setups with dedicated subwoofers and amplified mid and high speakers.



  • Power Output: 50W into 8Ω (stereo)
  • Frequency Response: 10Hz to 50kHz
  • Distortion: 0.03%
  • Damping Factor: 50
  • Speaker Impedance: 4 to 16Ω
  • Input Sensitivity: 2.5mV (mm), 150mV (line)
  • Signal to Noise Ratio: 86dB (mm), 106dB (line)
  • Line Output: 150mV (line), 30mV (din)
  • Dimensions: 455 x 179 x 385 mm
  • Weight: 11.3 kg
  • Year: 1977
  • Price:

Kenwood KA-6150

Kenwood KA-6150

Kenwood KA-6150

Kenwood KA-6150

Kenwood KA-6150

Kenwood KA-6150

Kenwood KA-6150



Share
Pin
Send
Share
Send
Share