Kenwood KS-303HT (Front)

Send

Brand: Kenwood

The Kenwood KS-303HT is a communications receiver from the Kenwood brand. Here's what you can expect from its front panel:1. Power On/Off Button: It is located at the top right corner of the receiver, and when pressed, it turns the device on or off.2. Function Button: Located beside the power button, this button is used to switch between various functions of the receiver, such as selecting a band or changing a setting.3. Display Screen: This OLED display provides information about the frequency, mode, and station that the receiver is tuned to, as well as other important data.4. S-Meter: Just below the display screen is the S-Meter, which measures the strength of the received signal.5. Keypad: This 12-key keypad is used to input numbers for frequencies, stations, and other functions.6. VFO/MR Button: The VFO/MR button separates variable frequency oscillator (VFO) mode from the memory mode (MR) to remember and access frequently tuned channels.7. Band Selection Knob: This knob is used to select the communication band (e.g., 20m, 40m) of interest.8. Tuning Knob: This knob is used to fine-tune the frequency and change the tuning steps.9. ARX/XIT Button: In SSB/CW modes, it activates the automatic receiver carrier suppressor (ARC) or external modulation by an external audio source (XIT).10. CW Button: This button switches the receiver mode between USB, LSB, CW, and AM/FM.11. ANL/NR Button: The ANL/NR button provides ANL (noise reduction) or NR (noise blanker) signal processing to suppress background noises.12. SPLIT Button: This button allows for splitting the current frequency into the transverter or duplexer operation.13. INTERVAL Button: It allows setting the time when the receiver wakes up and is put to sleep for saving power consumption.14. USB Input: A common USB type-B port used for firmware updates or connecting external devices such as computer or memory key.15. Power Indicator Light: On the bottom right corner, the orange LED light indicates whether the receiver is powered on.16. Speaker: Provides audio signals, which can be muted or changed through headphone jacks or external speakers.17. Headphone and External Speaker Inputs: The 3.5m and RCA connectors allow for using external speakers or headphones when needed.18. BNC Antenna Connector: Used for connecting the antenna cable to receive the radio signals.19. PHONE and LINE Inputs: Allows for using an external telephone line or audio input source for communication or CW transmission.20. WISHbone Connector: Multifunctional 18-pin connector for add-ons, such as GPS, SWR, or DVR modules, and covering more special features like stereo audio processing or superheterodyne architecture 100KHz IF.Additional Feature:1) 24-hour clock display.(Back)21. 12V DC power inlet: Used to connect the power supply.22. DC Voltage Connection: Used to indicate the DC voltage level from the power supply.23. Left Align/MENU Button: Provides access to the menu on the OLED display, altering the settings and configurations for operating the receiver.24. Reset Button: Utilizes when hardware or software malfunctions need to be revoked.25. LED indicators: Useful for status report on some other aspects such as power, ALC, SWR, access, networking, telemetry, and BandScope.26. Clickable Control Knob: Serves as a multifunctional knob to carry out essential actions like changing frequencies, adjusting volume, initiating split operation, setting attenuator, setting VOX threshold, and more.27. Data Interface terminals: They allow communication via USB, RS-232, and GPIB interfaces.28. Multiple VOICE / Language choices: Allow the user to select according to the preference for communication purposes globally.

Type: 2 way, 2 driver loudspeaker system
Frequency Response: 100Hz to 20kHz
Sensitivity: 88dB
Crossover frequency: 3000Hz
Impedance: 8Ω
Power handling: 80W
Recommended Amplifier:
Dimensions: 129 x 198 x 120 mm
Weight: 1.2 kg
Year: 2001
Price: